top of page
ACSmartSeal.quickshot.png

AC SmartSeal Quick Shot is our newest technology that does not require pumping down of the system. The re-usable injection hose will last for multiple doses and is operator friendly. This product is ideal for direct pinhole repairs and the prevention of refrigerant leaks. Our concentrate solution is a 100% green, eco-friendly AC leak sealant that is non-flammable, non-toxic, and safe for the user.

​

Product Numbers: 322, 322BP, 322WO-DYE, 322-6

Product Info

​

  • Does not require pumping down of the system

  • ​​Ideal for direct pinhole repairs and the prevention of refrigerant leaks.

  • Eco-Friendly

  • Polymer Free

  • It is not reactive to oxygen or moisture

  • Is suitable for any type of lubricant and refrigerant gas

  • While designing it, attention was paid to the new ecological refrigerant gases R1234yf, R1234ze​​

  • Use Smart Adapter Hose (#333) to inject without using manifolds.

Low Pressure: Use with Quick Push Adapter

High Pressure: Use with Reusable Injector

High Pressure: Use without Manifold

Instructions for Use
 

DONE IN 4 FAST AND EASY STEPS :

  1.  Turn the A/C system on. If the unit is a heat pump, be sure it is set on cooling mode. Connect the cartridge to Easy Inject and fully inject sealant in it.

  2. Connect Easy Inject to the low-pressure service port of A/C system. Connect a charging hose to a refrigerant cylinder.

  3. Briefly open the cylinder valve to purge air out of the charging hose. Quickly tighten the charging hose fitting to Easy Inject. Inject refrigerant through Easy Inject and push sealant into the A/C system.

  4. Run A/C system for 30 minutes to allow the product to fully circulate.

* Use Smart Adapter Hose (#333) to inject without using manifolds.

bottom of page